Honda Africa Twin Crash Bar Mount

PIAA Billet Mounting Bracket PIAA Billet Mounting Bracket 7/8", 1", 1-1/8", 1-1/4" (black) 74000 ebay 57.00

PIAA Billet Mounting Bracket PIAA Billet Mounting Bracket 7/8"-1-1/4" (black) 74000 ebay 57.00

Mount Lights on Crash Bar This is the supplied plastic bushing for mounting the bracket on 1" crash bars.

Mount Lights on Crash Bar Getting an idea of exactly where I'm going to mount the lights. The bottom of the bracket swivels. I hung the light from the bracket to check out the position. Mount the lights inside of the crash bars. If you mount them wide so they stick out they will get damaged when the bike falls over.

I hung the light from the bracket to check out the position. Mount the lights inside of the crash bars. If you mount them wide so they stick out they will get damaged when the bike falls over.

Mount Lights on Crash Bar I hung the light from the bracket to check out the position. Mount the lights inside of the crash bars. If you mount them wide so they stick out they will get damaged when the bike falls over.

Mount Lights on Crash Bar This is what I'm looking for. I turned the fork to make sure nothing interferes.

Mount Lights on Crash Bar This is how the swivel bracket works. You insert the swivel into the clamp and tighten it with the allen screw.

Mount Lights on Crash Bar Put Locktite blue on the clamp screws.

Mount Lights on Crash Bar Put the clamp over the bushing. Put locktite blue on the screws.

Mount Lights on Crash Bar The nuts that come with the Denali lights are self locking so you don't need Locktite. Don't tighten yet.

Mount Lights on Crash Bar Put Locktite blue on the swivel screw. Move the light on the bar and aim it straight ahead. Now tighten all the screws.

Routing the Wires I ran the 2 wires inside the forks over the lower triple tree to avoid them catching on a branch and getting pulled out.

I ran the left wire to the left of the harness bundle to hold it away from the upper crash bar clamp when the steering was turned all the way to the left.

Routing the Wires I ran the left wire to the left of the harness bundle to hold it away from the upper crash bar clamp when the steering was turned all the way to the left.

I ran the main light harness so it exits in the center above the upper trip`le tree. I plugged the lights into the harness. Because I kept everything close to the center nothing gets stretched when I turn the forks.

Routing the Wires I ran the main light harness so it exits in the center above the upper trip`le tree. I plugged the lights into the harness. Because I kept everything close to the center nothing gets stretched when I turn the forks.

Flipping the Lens The diffused beam of the selective yellow lens has to be on the bottom.

Flipping the Lens Use a 2.5mm hex and flip the lens over. This is how they're supposed to be.

Square everything up and tighten all the screws. The lights are mounted inside the crash bars so they won't get damaged when the bike goes down.

Mount Lights on Crash Bar Square everything up and tighten all the screws. The lights are mounted inside the crash bars so they won't get damaged when the bike goes down.

Mount Lights on Crash Bar Square everything up and tighten all the screws.