SW-MOTECH PRO Side Carrier. SW-MOTECH PRO side carrier. Honda CRF1100 L Africa Twin Adventure Sports SD09 (19-22) No.: KFT.01.942.30000/B 285.00
Hardware Push Lock Fastners and retaining clips.
Hardware
Remove the 4 Plastic Plugs Unscrew the 4 plastic plugs at the bottom of the 4 anchor points.
Put Locktite Blue on the 4 Mounting tab Bolts Put the spacers over the end of the bolts.
Attach the 4 Mounting Tabs to the Mounting Points on the bike Through the Spacers
Remove the Left Side Footrest Mount Use a 10mm socket. The bolt heads are shallow so you have to be square on the bolt.
Sandwich the Mounting Tab Between the Footrest Mount and the Frame. Locktite the 2 screws.
Remove the Heel Guard and Screws From the Right Side of the Bike with a 5mm hex You won't be reusing these.
Attach the Mounting Tab Where the Heel Guard Went Locktite the 2 screws.
Retaining Clip This clip holds the push to lock fastners onto the rack so they don't fall out when the rack isn't in use. Just push them down on the cross pin on the fastner till they snap past the pin.
Retaining Clip This clip holds the push lock fastners on the rack so they don't fall out when the rack isn't in use. Just push them down on the cross pin till they snap past the pin.
Retaining Clip This shows the retaining clip in place. Put the push lock fastners and retaining clips on all the tabs on the 2 racks.
Engage the Push Lock Fastners Line them up, push them with a screwdriver and turn them 1/4 turn.
Remove the license Plate
Put the Rear Frame Bracket in Place Clip the Frame to the Rear Frame Bracket
Center the Frame Bracket in the License Plate Slots
Fasten the Frame Bracket to the Bike Use the Supplied Bolts to Fasten the Rear Frame Bracket and License Plate to the Tail of the Bike
Make Sure the Rear Frame Bracket is Centered With the frames in place go back and tighten all the mounting screws.
